Part 6
-
Plastic kit parts of air condition and cab back wall glued with the corresponding etched parts
-
The sun visors are made from a photo etching part and a very thin plastic part. I have bent the etching part in a 90 degree angle, then with adhesive tape glued onto the cutting mat and with the aid of a wire and a plastic strip is formed to round. The kit parts I cut in half and cut left and right about 1cm. Then I could put the kit parts in the etching part and Glue to the window frame. The whole thing is actually moving.
-
Tubes hang in the cab for the air supply in case of poison gas use. These are fastened to the central air distribution and fixed to a tiny etching part. The hose kit replicas are very thin and break easily. So I used plastic tubing as a replica. One end is expanded and placed on the central manifold, provided the other end with its end part of the kit and hung on the etching part.